Tuesday, August 18, 2009

Save a BUNCH of photos all at once!

If you are anything like me, you take a couple of hundred pictures PER photo shoot. I know for me, it's hard enough to find time to sit and weed through to find the good ones, delete the bad ones, and then edit them all. After all of that, I'm too worn out to share any of them! Since it's so much more common now to simply take photos with your digital camera and share them with friends and family through the Facebooks of the world, there is now a need to have a separate set of low resolution copies of your photos. Most online sharing sites have limitations as to how large your files can be. Even if they don't, thousands of people uploading tons of huge files can slow a website waaaay down. But the thought of going through hundreds of photos one by one, changing the size and saving them to a different folder, and THEN still having to go through the process of uploading to your share site of choice is enough to throw me over the edge. But there IS an easier way... and it can LITERALLY take under 2 minutes.
(**This tutorial was created using Photoshop CS4. Most of the instructions should be very similar in CS2 and 3 and most versions of Photoshop. If you are using Photoshop Elements, these steps will not be the same. I did Google "batch-saving in Photoshop Elements" and found a couple of links that may be helpful, they are listed at the bottom of this tutorial.)
(click on images to see screenshots larger)



We can actually save a "Batch" of photos all at once!!! You will be blown away at how easy this is and how much time it will save you! Now before we start on our batch, we need to do a bit of set up. You will only have to do this once. After you go through this tutorial, you will have everything you need to press a few buttons and quickly save your batch of photos from now on.



The first thing we need is a Photoshop Action that will take our high resolution photos and reduce the size of them for us. Since images also tend to lose color and become a bit blurred when posting them to the internet, we will go ahead and create our action to take care of that too. If you are already familiar with creating Actions or if you already have an Action that will do this, feel free to skip the first 1/2 of this tutorial. If you are not familiar with creating Actions, don't be alarmed. I assure you it is waaaay less intimidating than it seems. So don't think about it... just jump right in here with me!



1.) Open a photo in Photoshop. Any photo will do. This is just our "bait" photo to create our action. Just make sure it is a high resolution photo (300dpi).





2. Make sure your Actions Palette is visible. If you do not see your Actions Palette, go to Window and choose Actions.





3. Once you see your Actions Palette, click on the folder icon to create a new action set.





4. Name your new action set (in this case, I'm calling this set "Resizing Tools") and then click OK.





5. Now on your Actions Palette, click the New Action icon . When your New Action window comes up, simply name your action (in this case, I've called it "Prep for Web") and make sure it is going to the Action Set you just created. Then set the other settings as desired and press Record.





6. Photoshop will now begin recording your steps. You will know it's recording by the red button on your Actions palette being activated... much like a VCR.





7. The first step we want is to duplicate our image. (This avoids accidentally saving over our high resolution photo.) So go to Image and then choose Duplicate.





8. When the title box comes up, there's no need to change the name. I always just leave it as is.





9. Now let's resize our photo. Go to Image and choose Image Size.





10. Now change the settings as follows. Be certain to choose Bicubic Sharpener (best for reduction). This is what will sharpen our image so it doesn't appear all blurry on the web. Then click OK.





11. Now let's tweak the saturation to keep it from looking bland once it's posted on the web. Go to Image and choose Adjustments and then Hue/Saturation.





12. Now simply give the saturation a little boost. Be subtle. Between +6 and +10 should work for most photos. Then click OK.





12. Now we want to tell our action to save our new image. (*NOTE:So that we will be able to use our "Prep for Web" action for saving individual items as well (such as scrapbook pages or previews), you will want to save it to the same folder as your high res photo. For our purposes here, you can go back into that folder and delete the low res copy once you are finished creating your action. But by saving it to the same folder as your high res image while you are recording, this will tell your action that normally (when you are not saving things in bulk) that you want to save your new low res image in the same folder as your high res image... it will make it very easy to locate. Does that make sense?)



14. Now simply close both of your open photos. If you are asked if you want to save your changes, click No.





15. That's it. Our action is created. Now simply press Stop.





16. If desired, you can activate your options and choose Button Mode.





Button Mode is a preference. I like it because instead of having to find the action set, then click on the desired action, and then press play, all you have to do is scroll down to find your action and press it. (Hey... those fractions of a second it takes for those extra steps can reallllly add up! hahaha). But also in Button Mode, you can assign your action a color that will make it stand out. For actions you use quite often, this is a DREEEEAM!





Now for our Batch...


Once you have your action created, all you have to do is run your batch.



1. Click on your Bridge icon to launch. (Or you can go to File and choose Browse Bridge)







2. Once your Bridge is open, choose Pictures and then double-click on the folder of pictures desired.





3. Now just click on any one of the photos in that folder.





4. Now choose Tools, then Photoshop, then Batch.





5. The top section is labeled Play. This is where you tell your batch what action you want it to perform on each photo. So you will choose the Resizing Tools set, and within that set you would choose the Prep for Web action.



Under the section labeled Source, you will be telling your batch which photos you wish to run your action on. So choose Folder (or Bridge, whichever you choose to pull from), and then click the Choose... button. Now choose the folder from your computer in which these photos are located and click OK.






6. The bottom 1/2 of the window is your Destination section. This is where you will tell your batch what to do with the photos after it runs the action on them. I usually create a folder within my photos folder called low res. So the destination of your low res photos will be that folder. Go ahead and check "Override Action 'Save As' Commands, even though we didn't create a 'Save As' step in our action. There may be 'Save As' steps in other actions and after your first batch, it should remember it's settings.



Then under File Naming, this is of course where you tell your batch how to name and organize your photos within their new folder. Here is how I named mine and the function of each field: goku+z (this tells me what the pictures are of) _ (an underscore sets the file name up for the next reference, which will be serial number) 3 Digit Serial Number (which I have chosen below to start at 1) - (sets the file name up for the next reference) low res (this is so I won't ever get the low res mixed up with the high res) extension (of course, this will be .jpg or .png or whatever.)


(*NOTE: In the example they provide, when you choose "extension" it defaults the example to show it as a .gif file. This threw me at first. I thought it was trying to make MY file a .gif file. It took me forEVER to realize that it just pops an extension in there to show how it looks. Yeah... i felt kind of silly. It will know which kind of extension to place on your file. hahaha. Anyway... now the fun part... once you're done with the file naming, click OK and then sit back and watch as Photoshop does allllll the work. You don't have to touch another button until it's time to upload them to the web! Whether it's 10 photos or 200!






Now, you have a nice folder with your high resolution photos for printing, that contains a sub-folder with low resolution photos for posting to the web! That is an OBSCENE amount of time saved everytime you sit down to resize your photos!!






That's it... you're done. :) I would love to know what you think of this tutorial. Please feel free to leave comments!



Photoshop Elements Users:



http://www.kyrene.k12.az.us/EdTech/class_res/elements/batch.htm

http://graphicssoft.about.com/od/digitalphotography/l/blps_batch.htm

20 comments:

BoBo said...

Many Thanks, it is for the useful educational post:-)

LovelyMissKait said...

Thank you so much for the wonderful tutorial! Can't get enough of them.

MariaT said...

I should definitely give that a try, thanks so much Amanda!

stacy said...

I am so excited to give this a try. It takes me so long to resize for the web. I knew there had to be an easier way but I just didn't know how to do it. THANK YOU!!!

texasbarb said...

I so wish I could make this action but I use PSE :-(. Anybody want to share the action they made with us PSE users???

Toki Lee Kanitz said...

Awesome! Thanks so much for taking the time to share wtih us. Have a great day!

Therese said...

You are the queen of tutorials !!!!

Anonymous said...

I cannot tell you how much I love this action. So many hours saved. Unbelievable!
Thank you thank you thank you!

Rose said...

What a great post, thanks for the awesome tutorial!

April said...

Fantastic! I always wondered how to create an action and this is a great start.

Erin L. said...

Wow - I'm so excited - this will save so much time. I always put off showing pics to friends/family because it takes too long to resize them all - this will be a great thing to have! Thanks, Amanda!

Stacy said...

I, too, use PSE and can't make this action. :(

Shannon said...

I love it. Your a genius!

Claire said...

thanks for this tutorial...now uploading the pix is so easy...

Chela said...

HELP!!! Can I do this with photo shop elements too???

Amanda said...

EEEEEK!!! YAY!!! I just did it.. TWICE.. that means the first time wasn't a fluke! hee hee! .. Thank you soo much for the awesome tut, anything that saves me time on my painfully slow workflow is greatly appreciated! THANK YOU!!!! :D AND.. I've never known how to post pics on the web properly.. and I've tried MANY other ways.. this way, they look great!! thanx again!

Anonymous said...

Thank you so much Amanda. An awesome action that I will use ALL the time :)

Jobs @ bigjobsboard.com said...

Wow! Amazing! I didn't know that. I have been using Photoshop now and I haven't discover that thing. Dang! Thanks for sharing it.

Whisper Pink said...

this is just an awesome Tutorial...I have it all set up and now I can do this sooo much faster and set it in motion and go put laundry in...multi tasking :D
Thanks for this!!!

Deb7456 said...

THANK YOU!! I've never used actions before, and I found this just at the right time today. It probably saved me two hours on a family project that had to be done before I leave town tomorrow! For a mom of 4, that's a sanity saver. :)